Ir a contenido
¡Disfruta de envío rápido y gratuito en todos los pedidos superiores a $89! Contáctenos (855) 424-4376
¡Disfruta de envío rápido y gratuito en todos los pedidos superiores a $89! Contáctenos (855) 424-4376
Black Diamond Modern Path Light, Bronze w/MR16 ECOSTAR 4W 2700K 30Deg Lamp

Black Diamond Modern Path Light, Bronze w/MR16 ECOSTAR 4W 2700K 30Deg Lamp

por Brilliance LED
SKU BD-MPL-G4-WAFER-BZ
$ 0.00 - $ 0.00
$ 0.00
$ 166.00
$ 166.00 - $ 166.00
$ 166.00

The Black Diamond Modern Path Light is available with a G4 Wafer lamp (3W 2700K 120° beam spread 300 Lumens) to be installed. Simply install the lamp and screw on the glass lens. This modern fixture is a downward facing path light perfecto for path, area, and garden accent lighting. This fixture comes in a black or bronze (BZ) baked enamel finish.

 

BLACK DIAMOND PATH LIGHT SPECIFICATIONS
Use Path, Area, and Garden Accent Lighting
Finish Black or Bronze
Includes ABS Mounting Stake
Warranty 10 Year Warranty on Black Diamond Fixtures
Order With Lamp
G4 Wafer, 3W, 2700K		 BD-MPL-G4-WAFER
BD-MPL-G4-WAFER-BZ
Order Without Lamp
Fits G4 Bi-Pin		 BD-MPL-G4-WAFER-NL
BD-MPL-G4-WAFER-BZ-NL

SOFT SOIL APPLICATIONS: INSTALLING THE GROUND STAKE & FIXTURE

  1. Connect the power cable from the fixture body to the landscape cable.

  2. Lay the power cable into the slotted relief on the stake.

  3. Press the fixture and stake into the ground.

  4. Use a level to ensure the top of the stake is level with the ground.

HARD SOIL APPLICATIONS: INSTALLING THE GROUND STAKE & FIXTURE

  1. Unscrew the fixture body from the stake.

  2. Dig a hole approximately 4” wide by 10” deep and gently tap the stake into the ground with a rubber mallet.

  3. Use a level to ensure the top of the stake is level with the ground.

  4. Reinstall the fixture body onto the stake and lay the power cable into the slotted relief on the stake.

  5. Connect the power cable from the fixture body to the landscape cable.

INSTALLING THE LAMP

  1. Loosen the screw for the lens cover.
  2. Install the G4 Wafer into the socket.
  3. Place the lens cover back on the fixture body.
  4. Tighten the screw for the lens cover.

Publicaciones de blog

Ver más

Comparar productos

{"one"=>"Seleccione 2 o 3 artículos para comparar", "other"=>"{{ count }} de 3 artículos seleccionados"}

Seleccione el primer artículo para comparar

Seleccione el segundo artículo para comparar

Seleccione el tercer elemento para comparar

Comparar