Ir a contenido
¡Disfruta de envío rápido y gratuito en todos los pedidos superiores a $89! Contáctenos (855) 424-4376
¡Disfruta de envío rápido y gratuito en todos los pedidos superiores a $89! Contáctenos (855) 424-4376
Black Diamond PAR36 Flat Top Well Light, Bronze w/PAR36 Gimbal No Lamp

Black Diamond PAR36 Flat Top Well Light, Bronze w/PAR36 Gimbal No Lamp

por Brilliance LED
SKU BD-WL-PAR36-FLAT-BZ-NL
$ 0.00 - $ 0.00
$ 0.00
$ 112.06
$ 112.06 - $ 112.06
$ 112.06

The Black Diamond PAR36 Well Light comes in three glass top variations: flat, flat grate, or angled. All glass tops are available in Black Brass or Bronze finishes. It is available without a lamp. This well light is fitted for any of our PAR36 lamps and really comes to life with the Chameleon PAR36 for RGBW applications.

BLACK DIAMOND PAR36 WELL LIGHT SPECIFICATIONS
Use Well Lighting & Underground Up Lighting
Finish Top: Black or Bronze
Body: Composite
Includes Heavy-Duty Stainless Steel Adjustable Gimbal
Warranty 10 Year Warranty on Black Diamond Fixtures
Order With Lamp
PAR36, 7W, 2700K, 30°		 BD-WL-PAR36-FLAT
BD-WL-PAR36-ANGLE
BD-WL-PAR36-FLAT-GR
BD-WL-PAR36-FLAT-BZ
BD-WL-PAR36-ANGLE-BZ
BD-WL-PAR36-FLAT-GR-BZ
Order Without Lamp
Fits Chameleon PAR36, PAR36		 BD-WL-PAR36-FLAT-NL
BD-WL-PAR36-ANGLE-NL
BD-WL-PAR36-FLAT-GR-NL
BD-WL-PAR36-FLAT-BZ-NL
BD-WL-PAR36-ANGLE-BZ-NL
BD-WL-PAR36-FLAT-GR-BZ-NL

 

INSTALLING THE LAMP

  1. Loosen the thumbscrew on the lens cap and remove the lens cap and the stainless steel gimbal from inside the Black Diamond PAR36 Well Light.

  2. Install the lamp and snap it into the gimbal.

  3. Return the gimbal to the well light.

  4. Place the lens cap and tighten the thumbscrew to protect from debris.

INSTALLING THE FIXTURE

  1. Dig a hole in the ground approximately 12” wide by 14” deep.

  2. Connect the power cable to the fixture, leaving 2 feet of wire coiled in the bottom of the fixture for future service.

  3. Pour 8” of pea gravel in the hole.

  4. Place the fixture in the center of the hole.

  5. Add more pea gravel to fill the hole 1” before the fixture lip. This allows for proper drainage around the fixture.

  6. Place the specified lens assembly on the top of the fixture and tighten the set screw. Use the specified lens in all applications to protect from debris.

  7. Apply glass wax on top of the lens to protect against standing water.

Publicaciones de blog

Ver más

Comparar productos

{"one"=>"Seleccione 2 o 3 artículos para comparar", "other"=>"{{ count }} de 3 artículos seleccionados"}

Seleccione el primer artículo para comparar

Seleccione el segundo artículo para comparar

Seleccione el tercer elemento para comparar

Comparar