DIG Irrigation - PCO-005 PC - Self-Flushing 0.5 GPH Button Drip Emitter

DIG Pressure Compensating (PC) Button Drip Emitters are designed to produce a consistent flow rate over a pressure range of 7.25 to 58 PSI. DIG PC drip button emitters are continuously adjusting to varying water pressures, ensuring a constant flow from each drip emitter regardless of pressure fluctuations or varying elevations along the line. The PC drip emitters are available in .5, 1, 2 and 4 GPH. Used for flowers, shrubs groundcovers and trees, DIG PC drip emitters offer a convenient way to water both, new and existing landscapes, including difficult terrain such as slopes, oddly shaped areas and sites with high winds.

Features

• Labyrinth water passage with a floating silicon diaphragm design provides a self-cleaning mechanism at the water outlet
• Barbed inlet for installation into drip tubing or 1/4″ distribution tubing
• Male nipple outlet for a placement of multi-outlet adapter or bug caps
• Constructed of UV-resistant, durable plastic material to withstand the most adverse conditions
• Available in four color-coded flow rates for easy identification
• Pressure compensation enables the use of longer laterals with smaller diameter tubing
• Ideal watering solution for long laterals, rapid irrigation cycles, and for light soils
• Outlet can be connected into 1/8″ micro tubing with a stake for branching from the main line or lateral
• Unaffected by fluctuating inlet water pressure

Specifications

• Operating pressure:
  • 7.25 - 58 PSI (.5 - 4 BAR)
• Flow rates and color codes:
  • .5 GPH (1.78 L/H) color code – brown
  • 1 GPH (4 L/H) color code – black
  • 2 GPH (7.60 L/H) color code – green
  • 4 GPH (15.5 L/H) color code – red
• Inlet size:
  • 1/4" (4 mm) barb
• Outlet size:
  • 1/4" nipple
• Filter requirement:
  • 120 mesh/130 microns for .58 GPH (2.2 L/H) or lower
  • 150 mesh/100 microns for 1 GPH (3.8 L/H) or higher
  Filter selection depends on water quality and concentration of dirt particles
• Materials:
  • Body and cover: polypropylene
  • Diaphragm: silicone

Operating pressure:
7.25 - 58 PSI (.5 - 4 BAR)
Flow rates and color codes:
.5 GPH (1.78 L/H) color code – brown
1 GPH (4 L/H) color code – black
2 GPH (7.60 L/H) color code – green
4 GPH (15.5 L/H) color code – red
Inlet size:
1/4" (4 mm) barb
Outlet size:
1/4" nipple
Filter requirement:
120 mesh/130 microns for .58 GPH (2.2 L/H) or lower
150 mesh/100 microns for 1 GPH (3.8 L/H) or higher
Filter selection depends on water quality and concentration of dirt particles
Materials:
Body and cover: polypropylene
Diaphragm: silicone