Rain Bird - 100HVMB - 1" HV Series Inline Sprinkler Valve - Male x Barb

Spec Sheet  Install Manual

• 1 in. (26/34) male threaded by barb inlet plastic residential irrigation valve
• Eccentric diaphragm for smooth closing, less water hammer
• Compact design, 2.54 in. spin radius for tight installations (install more valves in a single valve box)
• Captive multi-drive screws for ease of access and faster bonnet removal
• Glass-filled polypropylene body for strength
• Your choice of tools to open valve (nut driver, Phillips head screw driver, slotted head screw driver)
• Four screws for quick access to diaphragm

Additional features:

• Reverse flow normally closed design.
• Double-filtered pilot flow for maximum reliability.
• Balanced-pressure diaphragm for long life.
• Buna-N diaphragm with self-cleaning 90-mesh (200 micron) pilot water filter and stainless steel spring.
• Operates in low-flow and Xerigation® applications when the RBY filter is installed upstream.
• Available in multiple fitting types.
• External bleed to manually flush system of dirt and debris during installation and system start up.
• Internal bleed for spray-free manual operation.
• Four screws for quick access to diaphragm.
• Trouble-free service with few parts.
• Diaphragm locating post for positive installation.

• Valve Size: 1 in
• Valve Type: Inline
• Material: Plastic
• Valve Inlet/Outlet Configuration: Male x Barb
• Valve Series: HV
• Operating Temperature: Water temperature up to 110° F (43° C); ambient temperature up to 125° F (52° C)
• Dimensions:
• Height: 4.50" (11,43 cm)
• Length: 5.68" (14,4 cm)
• Width: 3.1" (7,9 cm)
• Electrical Specifications:
• 24 VAC 50/60 Hz (cycles/sec.) solenoid
• Inrush current: 0.290 A at 60 Hz
• Holding current: 0.091 A at 60 Hz
• Coil resistance: 70-85 Ohms (40° F - 110° F)
• Flow Range: 0.2 to 30 GPM (0,05 to 6,82 m3/h; 0,01 to 1,89 l/s); for flows below 3 GPM (0,68 m3/h; 0,19 l/s) or any Xerigation® application, use a 200 mesh filter installed upstream.
• Operating Pressure: 15 to 150 PSI (1,0 to 10,3 bar)

*One Solenoid Handle Per Order

Model 100HVMB
Valve Size 1 in
Valve Type Inline
Material Plastic
Valve Inlet/Outlet Configuration Male x Barb
Valve Series HV
Operating Temperature Water temperature up to 110° F (43° C); ambient temperature up to 125° F (52° C)
Dimensions
Height: 4.50" (11,43 cm)
Length: 5.68" (14,4 cm)
Width: 3.1" (7,9 cm)

Electrical Specifications
24 VAC 50/60 Hz (cycles/sec.) solenoid
Inrush current: 0.290 A at 60 Hz
Holding current: 0.091 A at 60 Hz
Coil resistance: 70-85 Ohms (40° F - 110° F)

Flow Range 0.2 to 30 GPM (0,05 to 6,82 m3/h; 0,01 to 1,89 l/s); for flows below 3 GPM (0,68 m3/h; 0,19 l/s) or any Xerigation® application, use a 200 mesh filter installed upstream.
Operating Pressure 15 to 150 PSI (1,0 to 10,3 bar)

Height: 4.50" (11,43 cm)
Length: 5.68" (14,4 cm)
Width: 3.1" (7,9 cm)