DIG Irrigation - 33-014 - 3/4” Inline Globe Valve with Flow Control, 24 VAC

DIG’s 3/4, 24VAC heavy-duty plastic inline control valves are designed for reliable operation with superior hydraulic performance. The plastic control valves demonstrate exceptional performance for optimal control of any irrigation system, featuring a flow control handle for flow adjustment and manual shutoff, and internal manual opening via the solenoid for smooth opening and closing. The 2 VAC plastic control inline valves are suitable for above- or below-grade installation in residential and commercial applications.

Features

• Constructed of a UV-resistant, glass-reinforced nylon bonnet with a stainless steel spring and non-corrosive materials
• High flow with low pressure loss
• Operates in a wide range of flow rates
• Normally closed
• Flow control handle for water flow adjustment and manual shutoff
• Manual or automatic operation
• Flow-control adjustment – can be used to reduce sprinkler over-spray
• Smooth valve opening and closing prevents pressure surge hazards
• The valve’s only moving component is its diaphragm with no shaft, seals, or bearings within the water passage
• Unobstructed flow path for higher flow rate with lower head loss
• Highly durable to chemical use with an irrigation system
• Flexible balanced diaphragm and seal
• Available in diameter sizes of 3/4” to 2”

Specifications

• Body Styles: inline (globe) valve
• Operating pressure: 10 to 150 PSI (.7 to 10.5 bar)
• Valve size: 1" with FNPT or British standard thread (BSP)
• Operating flow range:
  • 3/4" size: .1 to 28 GPM (.23 to 6.4 m3h)
• Solenoid: 24 VAC (50 -60 cycles)
  • Current: .032A (7.7 VA)
  • Holding Current: 0.16A (3.84 VA)
  • Power Consumption: 1.7/2.2 watts
• Material:
  • Body: glass-reinforced nylon
  • Bonnet: glass-reinforced nylon
  • Solenoid: glass-reinforced nylon
  • Spring and pins: Stainless steel
  • Diaphragm: Nylon fabric reinforced polyisoprene (NR)
• Dimensions:
  • 3/4": 4.5" H x 4.25" L x 3.12" W, (11.5 cm H x 11 cm L x 8 cm W)
  • Valve solenoid thread housing: 3/4”-20 UNES-2A

Body Styles: inline (globe) valve
Operating pressure: 10 to 150 PSI (.7 to 10.5 bar)
Valve size: 1" with FNPT or British standard thread (BSP)
Operating flow range:
3/4" size: .1 to 28 GPM (.23 to 6.4 m3h)
Solenoid: 24 VAC (50 -60 cycles)
Current: .032A (7.7 VA)
Holding Current: 0.16A (3.84 VA)
Power Consumption: 1.7/2.2 watts
Material:
Body: glass-reinforced nylon
Bonnet: glass-reinforced nylon
Solenoid: glass-reinforced nylon
Spring and pins: Stainless steel
Diaphragm: Nylon fabric reinforced polyisoprene (NR)
Dimensions:
3/4": 4.5" H x 4.25" L x 3.12" W, (11.5 cm H x 11 cm L x 8 cm W)
Valve solenoid thread housing: 3/4”-20 UNES-2A