DIG Irrigation - LEIT1 ILV-100 - LEIT Solar Powered controller with 1ʺ inline Valve

Spec Sheet  Install Manual

DIG LEIT Solar Powered controller LEIT1 ILV-100 with 1ʺ inline Valve

Ambient Light Powered Irrigation Controller

Powered solely by ambient light (solar), DIG has developed a fully self-sustainable irrigation controller that doesn’t use batteries or an AC power source. The LEIT-1 requires no direct sunlight and can obtain enough power from surrounding light to operate both day and night in any weather condition. In addition, the LEIT-1 employs SimpleSmart™ programming which automatically adjusts irrigation schedules monthly to help eliminate over and under watering, ensuring a healthy landscape while saving water

Saves Water

• SimpleSmart™ ET feature automatically adjusts irrigation schedules monthly

• Rain- and moisture-sensor compatible

• Daily and monthly programming restriction options to comply with city and municipal watering restrictions

Uses Clean, Sustainable Solar Power

• No batteries to change or replace

• No direct sunlight required

• No wires

Versatile

• Easily retrofits to most manufacturers’ valves

• Three solenoid valve adapters included

Programming Features

• Five start times per day provide added flexibility for any type of watering application including sandy or clay soil

• Valve duration up to six hours in one-minute increments

• Custom programming schedules using weeks, odd days, even days or intervals of 1-30 days utilizing a yearly calendar with leap year

• Twenty historical ET programming presets with 10 climate zones, 10 for drip irrigation and 10 for spray systems

• Monthly seasonal adjustment that modifies the watering duration from 5% to 200% in 5% increments without modifying the controller’s program duration

• Irrigation suspension (rain delay) for up to 99 days; resumes irrigation automatically

• Rain Delay with up to 99 days with auto restart

Controller Specifications:

• Power source: ambient light (PVM)
• Controller power input: 3,000 -100,000+LUX
• Seven keypad buttons with integrated liquid crystal display
• Temperature range: 38°F to +140°F (3°C to +60°C)
• Solenoid: 7-12 VDC, two-way latching, normally closed
• Solenoid control orifice: .065" (1.65 mm)
• Encapsulated solenoid thread: 11/16"-12 UN male thread
• Retractable solenoid wire: 8.1" (coiled length when extended, approximately 36")
• Sensor connection: normally closed 6" (15 cm) yellow wire (16 AWG)
• Solenoid adapter: 11/16"-12 UN female thread x 3/4”-20 UNEF male threaded
• Valves type & sizes: globe 3/4", 1" , 1 1/2" and 2"
• Materials:
  • Controller housing: high-impact plastic (polycarbonate)
  • Solenoid housing: glass-reinforced nylon
  • Plunger & spacer: 430F stainless steel
  • Plunger rubber cap: EPDM
  • O-ring: Buna-N
  • RoHS

Flow Rates:

• 1 in: 2-35 GPM
• Operating Pressure: 10-150 PSI (.7-10.5 BAR)
• Temperature Range: Up to 170°F (76.7°C)

1 Zone
1ʺ inline Valve .2-35 GPM (.23-6.4 m3/h)
Operating Pressure: 10-150 PSI (.7-10.5 BAR)
Temperature Range: Up to 170°F (76.7°C)

Controller only: 4.214 in. H x 5 in. L x 3.6 in. W
Controller plus 1-1/2 valves: 10.5 in. H x 8.5 in. L x 5 in. W