K-Rain - RPS75-RCW - Series 3/4" Rotor Purple Reclaimed Water

Spec Sheet   Install Manual

K-Rain’s RPS® 75 gear drive rotor is designed for residential and light commercial applications. The reliable, durable design is the foundation of K-Rain’s RPS Rotor line. This workhorse is built to perform trouble-free for years and has unequalled value in the market. Our patented reversing mechanism, on which all rotors are based upon today, assures continuous reverse and return. With K-Rain’s wide selection of standard and low angle nozzles, the RPS 75™ provides even water distribution.

A direct replacement for the Hunter PGP® rotor, with our time-proven, patented reversing mechanism (the same used in the Hunter PGP®), the RPS75® drops directly in an installed Hunter PGP® can.

Worldwide regulations frequently require reclaimed water usage sites to use components identified with a purple cap or collar.

FEATURES AND BENEFITS:

• Direct Replacement for Hunter® PGP®.
• Right Position Start – Rotor rotates counterclockwise from fixed right start position.
• Riser Fits in Existing Hunter® PGP® cans – Simply unscrew the existing riser from the PGP® can and replace with the RPS® 75 riser.
• Top Adjustment – No training necessary – the RPS® 75 has the same adjustment procedure as the Hunter® PGP®.
• Full and Part Circle Rotation – Provides a full range of adjustment from 40° to 360°.
• Non-flushing Wiper Seal – Reduces leaks caused by debris trapped under seal.
• 3/4" (1,9 cm) Inlet – Replaces all standard rotors.
• Ideal for Low Flow Applications.
• Universal Adjustment Tool – Compatible with existing Hunter® products.
• Rubber Cover – Seals out dirt and increases durability.
• Wide Selection of Nozzles – Including standard and low angle, provides flexibility in system design.
• Five Year Limited Warranty

SPECIFICATIONS:

• Inlet: 3/4" (1,9 cm) Threaded NPT
• Arc Adjustment Range: 40° – 360°
• Flow Range: .75 – 8.2 GPM (2,6 – 32,6 LPM)
• Pressure Rating: 30 – 70 PSI (2,1 – 4,8 bars)
• Precipitation Rate: .16 – .70 in/hr (4 – 18 mm/hr) (Depending on Spacing and Nozzle Used)
• Overall Height (Popped Down): 7 3/8" (19,7 cm)
• Recommended Spacing: 25' – 45' (7,6 – 13,7 m)
• Radius: 22' – 51' (6,7 – 15,5 m)
• Nozzle Trajectory: 26°
• Low Angle Nozzle Trajectory: 11°
• 8 Standard and 4 Low Angle Nozzles Included
• Riser Height: 4" (10,2 cm)

Direct Replacement for Hunter® PGP®.
Right Position Start – Rotor rotates counterclockwise from fixed right start position.
Riser Fits in Existing Hunter® PGP® cans – Simply unscrew the existing riser from the PGP® can and replace with the RPS® 75 riser.
Top Adjustment – No training necessary – the RPS® 75 has the same adjustment procedure as the Hunter® PGP®.
Full and Part Circle Rotation – Provides a full range of adjustment from 40° to 360°.
Non-flushing Wiper Seal – Reduces leaks caused by debris trapped under seal.
3/4" (1,9 cm) Inlet – Replaces all standard rotors.
Ideal for Low Flow Applications.
Universal Adjustment Tool – Compatible with existing Hunter® products.
Rubber Cover – Seals out dirt and increases durability.
Wide Selection of Nozzles – Including standard and low angle, provides flexibility in system design.
Five Year Limited Warranty

Inlet: 3/4" (1,9 cm) Threaded NPT
Arc Adjustment Range: 40° – 360°
Flow Range: .75 – 8.2 GPM (2,6 – 32,6 LPM)
Pressure Rating: 30 – 70 PSI (2,1 – 4,8 bars)
Precipitation Rate: .16 – .70 in/hr (4 – 18 mm/hr) (Depending on Spacing and Nozzle Used)
Overall Height (Popped Down): 7 3/8" (19,7 cm)
Recommended Spacing: 25' – 45' (7,6 – 13,7 m)
Radius: 22' – 51' (6,7 – 15,5 m)
Nozzle Trajectory: 26°
Low Angle Nozzle Trajectory: 11°
8 Standard and 4 Low Angle Nozzles Included
Riser Height: 4" (10,2 cm)