DIG Irrigation - S-305DC-10 7 - 12 VDC Solenoid with 11/16" -12 UN Thread (Pack of 10)

DIG’s S-305DC is an encapsulated, watertight, two-way magnetic latching solenoid that requires minimal power to operate. The S-305DC is used with DIG range of battery operated controllers, LEIT 2 ET system and others. With seven solenoid adapters available, the S-305DC can replace conventional solenoids on most valves, enabling DIG controllers to operate the majority of all brand name valves using DC power.

Solenoid Features

• Adaptable to a wide range of valves using one of our seven adapters
• Potted technique for sealed, waterproof construction
• Two 16 gauge, color-coded 18” wires
• Captured plunger and spring for reliable operation
• Made of durable plastic

Specifications

• Latching Solenoid: 7-12 VDC, two-way, normally closed
• Solenoid thread: 11/16"-12 UN
• Operating pressure: 10-150 PSI (.7-10.5 BAR)
• Coil Resistance: 4.7 +/- 0.3 Ohms
• Pulse Width: minimum 10 mSec
• Operation mode:
  • Red + and white – to latch open
  • Red – and white + to released and closed
• Lead wires: 18” (45 cm) UL-1015, AWG 16, 300V- red and white wires
• Weight: 4.2 oz (120 g)
• Diameter: 1.225” (3.1 cm)
• Overall Length: 2.5” (6.35 cm) without adapter
• Control orifice: .065 (1.7 mm)
• Temperature range: 32°F to 170°F (3°C to 77°C)
• Materials:
  • Solenoid housing: glass-reinforced nylon
  • Inside housing stainless steel parts: 430F stainless
  • Plunger rubber cap: EPDM
  • O-ring: Buna-N

Latching Solenoid: 7-12 VDC, two-way, normally closed
Solenoid thread: 11/16"-12 UN
Operating pressure: 10-150 PSI (.7-10.5 BAR)
Coil Resistance: 4.7 +/- 0.3 Ohms
Pulse Width: minimum 10 mSec
Operation mode:
Red + and white – to latch open
Red – and white + to released and closed
Lead wires: 18” (45 cm) UL-1015, AWG 16, 300V- red and white wires
Weight: 4.2 oz (120 g)
Diameter: 1.225” (3.1 cm)
Overall Length: 2.5” (6.35 cm) without adapter
Control orifice: .065 (1.7 mm)
Temperature range: 32°F to 170°F (3°C to 77°C)
Materials:
Solenoid housing: glass-reinforced nylon
Inside housing stainless steel parts: 430F stainless
Plunger rubber cap: EPDM
O-ring: Buna-N